Product Type: Q641F / H / Y
Nominal diameter: DN15 ~ 300mm
Nominal pressure: PN1.6 ~ 6.4Mpa
Suitable temperature: -28 ℃ ~ 300 ℃
Body material: WCB, ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti
Design and manufacturing: GB12237-89, API608, API 6D, JPI 7S-48, BS5351, DIN3357
Flange dimensions: JB / T74 ~ 90 (JB74 ~ 90), GB9112 ~ 9131, HGJ44 ~ 76, SH3406, ANSI B16.5, JIS B2212 ~ 2214, NF E29-211, DIN2543
Structural Length: GB12221-89, ANSI B16.10, JIS B2002, NF E29-305, DIN3202

O-pneumatic cut off the ball SUMMARY
Pneumatic O type cut off the ball pneumatic actuator using the new AT / GT Series pneumatic actuators, the structure of the State utility model patents, double-acting and single-acting (spring return), the gear rack structure Transmission, more secure and reliable performance. 
 
First, the pneumatic O-cut off the ball valve Introduction
 Pneumatic O-cut off pneumatic valve pneumatic actuator using the new AT / GT series of pneumatic actuators, the structure of the state utility model patents, a double-acting and single-acting (spring reset), the use of rack and pinion Structural transmission, more secure and reliable performance; large-diameter valve with AW series of pneumatic actuators, fork structure transmission, reasonable structure, large output torque. 
 Pneumatic O-cut ball valve with a second shut off the ball valve, with explosion-proof device, available gas cut off. It is composed of ball valve and single acting piston pneumatic actuator. It is widely used in industries such as natural gas, oil, chemical, metallurgy, paper-making, mining, printing and dyeing, biopharmaceutical, daily chemicals, food and beverage, water treatment and air treatment Fluid cut off control, and supporting the use of automated pneumatic instruments. 
 
Second, the pneumatic O-cut off the ball valve works
 Pneumatic O-cut ball valve by the body, ball, valve shaft, seal ring, packing, platen and other components. Actuators from the gas, piston, gear type, output shaft, cylinder head, bearings, guide ring, piston bush, adjusting bolts, "O" ring and other major components. Actuator and valve connection shaft. Cylinder input pressure, the role of the piston to produce a certain thrust, the gear-type output driven by the piston, the gear output shaft in rotation, driven by the rotation of the valve shaft, so that the valve ball with the rotation of the valve, change the valve Flow area, to achieve the purpose of changing the medium flow through the valve. 
 
Third, the pneumatic O-cut ball valve Features
 1, thrust bearing to reduce stem friction torque, stem long-term operation can be smooth and flexible. 
 2, seat sealing performance, using PTFE and other elastic materials made of seals.
 3, anti-static function: In the sphere, the valve stem, the spring between the body, the process can switch the static electricity derived. 
 4, the stem seal is reliable, as the stem only for rotational movement without lifting movements, stem packing seal is not easy to damage. 
 5, due to PTFE and other materials with good self-lubricating, and friction loss of the ball is small, so the long service life of the ball valve. 
 6, cut off fast, with one second cut off capacity, and good sealing performance, explosion-proof device can be equipped with gas pipe can be cut off. 
 
Fourth, pneumatic O-cut ball valve components and materials

Serial number	Part Name	Serial number	Part Name	Serial number	Part Name	Serial number	Part Name	Serial number	Part Name
1	Body	4	Nut	7	Gasket	10	Positioning pieces	13	Valve stem
2	Sealing ring	5	Stud	8	filler	11	Ring	14	Screw
3	Sphere	6	Stone body	9	Packing gland	12	handle	15	Thrust washer

 Fifth, pneumatic O-cut ball valve performance parameters

Test pressure  (Mpa)	Nominal pressure (Mpa)					Pressure class			JIS (Mpa)
	1.6	2.5	4.0	6.4	10.0	150	300	600	10K	20K
Strength test	2.4	3.8	6.0	9.6	15.0	3.1	7.8	15.3	2.4	3.8
Seal test	1.8	2.8	4.4	7.0	11.0	2.2	5.6	11.2	1.5	2.8
Airtight test	0.5 ~ 0.7

 Six, pneumatic O-cut ball valve technical parameters

Nominal diameter mm		DN15-DN300
Material code		C	P	R
The main parts	Body	WCB	ZG1Cr18Ni9Ti	ZG1Cr18Ni         12Mo2Ti
	Sphere	2Cr13	1Cr18Ni9Ti	1Cr18Ni12MoTi
	Valve stem	2Cr13	1Cr18Ni9Ti	1Cr18Ni12MoTi
	Sealing ring	Enhanced polytetrafluoroethylene para-benzene
	Filler	Polytetrafluoroethylene flexible graphite
Applicable conditions	Suitable  media	Steam, water	Nitric acids	Acetic acid
	Suitable  temperature	-28 ° C - 300 ° C
Actuator	Model	AW, DA / SR series, GTE series, TH series and so on
	Air pressure	0.4-0.7MPa

Seven, install the size table

DN (mm)	Size (mm)															Actuator model
	1.6MPa					2.5MPa					4.0MPa
	L	D	D1	b	Z-фD	L	D	D1	b	Z-фD	L	D	D1	b	Z-фD	Optional DA / SR, QGSY,  SY-CH, GTD / GTE  AW / AWS, SY-YD,  Series Actuators The  above options are for reference only Specific constituencies according to the actual requirements
15	130	95	65	14	4-14	130	95	65	16	4-14	130	130	65	16	4-14
20	130	105	75	14	4-14	130	105	75	16	4-14	150	150	75	16	4-14
25	140	115	85	14	4-14	140	115	85	16	4-14	160	160	85	16	4-14
32	165	135	100	16	4-18	165	135	100	18	4-18	180	180	100	18	4-18
40	165	145	110	16	4-18	165	145	110	18	4-18	200	200	110	18	4-18
50	203	160	125	16	4-18	203	160	125	20	4-18	230	230	125	20	4-18
65	222	180	145	18	4-18	222	180	145	22	8-18	290	290	145	22	8-18
80	241	195	160	20	8-18	241	195	160	22	8-18	310	310	160	22	8-18
100	305	215	180	20	8-18	305	230	190	24	8-23	350	350	190	24	8-23
125	356	245	210	22	8-18	356	270	220	28	8-25	400	270	220	28	8-25
150	394	280	240	24	8-23	394	300	250	30	8-25	480	300	250	30	8-25
200	457	335	295	28	12-23	457	360	310	34	12-25	600	375	320	38	12-30